King Electric White Programmable Thermostat for Heating Only

This thermostat is designed to provide the best temperature control for residential line voltage electric floor heating. For use on 24/120/208/240 Volt AC and a total of 16 amps load inductive continuous. Almost all residential application electric heaters installed by an electrician will be 208 or 240 volts. It is very rare that a home, apartment, or condominium would be wired with all 120-volt heaters. Check the voltage to make sure you have the right thermostat for your heater voltage. A 2-pole or double-wide circuit breaker at the panel indicates a 240-volt circuit. A 1-pole or single wide breaker indicates a 120-volt circuit. There are some exceptions to this rule; check with a voltmeter to determine accurate phase-to-phase voltage. Floor Mode: This thermostat will control floor temperature with a remote sensor placed in the tile or wood flooring. Room + Floor Limitation: It can also be set up to control the room temperature and floor independently. The floor is given a maximum limited temperature so that when the comfortable air temperature is reached the floor heating will shut off. This gives you full control and comfort.
Features
AA Battery powered (included)
F° or C° display
Large LCD Display
Digital
12 ft. remote sensor