Modern Horizontal Adjustable Railing Banister System for Staircases Balconies and Decks Complete Guard Railing Kit

This concept fusion fully adjustable banister is designed for extremely flexible application to suit the buyers need. It can be installed on a flat or on a stairway. The design allows the banister to adjust to fit your specific stair requirements on any angle of 0-45°. Posts are designed to mount on flat surface. The baseplate is not designed to mount angled surfaces or knee walls, but is made to install directly into steps/flat surfaces. Dimensions and materials:
–The banister is 42″ high from the floor to the top of the top rail
–The spacing of the gaps between the runners is approximately 3 7/8″
–Vertical posts are made from powder coated 2X2 steel tubing for high strength and longevity. Sizes include the following: Note: All sizes 6.5 foot and longer the aluminum runners and the top rails come in multiple pieces that splice together to make up the total length of the banister.
–All sizes from “18 Inch banister” through “4.5-foot banister” come with:
(2) steel posts + hardware, (8) aluminum runners, (1) aluminum top rail.
–All sizes from “5-foot banister” through “6-foot banister” come with: (3) steel posts + hardware, (8) aluminum runners, (1) aluminum top rail.
–All sizes from “6.5-foot banister” through “7.5-foot banister” come with: (3) steel posts + hardware, (8) aluminum two-piece spliced runners, (8) studs to extend runners, (1) aluminum two-piece spliced top rail with 1 splice to extend it.
–All sizes from “8 Foot Banister” through “10.5-foot banister” come with: (4) steel posts + hardware, (8) aluminum two-piece spliced runners, (8) studs to extend runners, (1) aluminum two-piece spliced top rail with 1 splice to extend it.
–All sizes from “11 Foot Banister” through “12-foot banister” come with: (5) steel posts + hardware, (8) aluminum two-piece spliced runners, (8) studs to extend runners, (1) aluminum two-piece spliced top rail with 1 splice to extend it.
–All sizes from “12.5 Foot Banister” through “13.5-foot banister” come with: (5) steel posts + hardware, (8) aluminum three-piece spliced runners, (16) studs to extend runners, (1) aluminum three-piece spliced top rail with 2 splices to extend it.
–All sizes from “14-foot Banister” through “16.5-foot banister” come with: (6) steel posts + hardware, (8) aluminum three-piece spliced runners, (16) studs to extend runners, (1) aluminum three-piece spliced top rail with 2 splices to extend it.
–All sizes from “17-foot banister” through “18-foot banister” come with: (7) steel posts + hardware, (8) aluminum three-piece spliced runners, (16) studs to extend runners, (1) aluminum three-piece spliced top rail with 2 splices to extend it.
–All sizes from “18.5-foot banister” through “19.5-foot banister” come with: (7) steel posts + hardware, (8) aluminum four-piece spliced runners, (24) studs to extend runners, (1) aluminum four-piece spliced top rail with 3 splices to extend it.
–All sizes from “20-foot Banister” through “22.5-foot Banister” come with: (8) steel posts + hardware, (8) aluminum four-piece spliced runners, (24) studs to extend runners, (1) aluminum four-piece spliced top rail with 3 splices to extend it. *Buyers must follow installation instructions.* **Concept Fusion is not responsible for buyer’s modifying the product in any way, including trimming and or cutting of pieces. Buyers must follow installation instructions.**
Features
The offered lengths of the banister are measured when installed on a flat surface, and are the length of the runners.
The banister is adjustable for use on flats or stairs of any angle from 0-45°
Flexible positioning of the vertical posts. Posts can be installed where you need them to be, as the runners slide through the vertical posts, and the top rail is installed using self-tapping screws.
Comes with 5/8 11 threaded studs to extend the runners. This banister can be extended to any length by using the provided 5/8 11 studs to thread together the pre-threaded round aluminum runners. The provided top rail also comes with an internal splice that allows you to easily add more sections for a continuous railing.
Excellent choice for contractors, as it is easy to install, adjustable, and extendable to any needed length.
Able to be trimmed on site.** This banister not only allows for flexible positioning of the vertical posts*, but the aluminum runners and the aluminum top rail are able to be custom trimmed on-site to fit your exact needs**. Comes with matching plastic endcaps for the runners and the top rail that can be installed in the ends of the runners.
Comes with stainless steel set screws, stainless steel mounting hardware, stainless steel bolts to install the aluminum runner clamps to the vertical posts, and stainless steel bolts to install the top hinges on the posts.
Posts are designed to mount on flat surface. The baseplate is not designed to mount angled surfaces or knee walls, but is made to install directly into steps/flat surfaces.