BI-HJWJL-1959 10000W 220V Electronic Transformer

This is a new series of step-up/step-down transformers with a large voltage of 10000W. You can convert the voltage from 110V to 220V, or from 220V to 110V. Its maximum rated power is 10000W, so it must be connected When using a cable, a plug cannot be used because the plug cannot carry such a large amount of power. It is mainly used in industrial activities. Note: on the Back of the Machine, Input Selection is in the Upper Row. Need To connect the Power Wire by Yourself. Output Voltage: 110v;Product Name: Power Transformer;Voltage Regulation Speed: less than 1 Second (When the Input Voltage Changes 10%);Product Capacity:4kva /5kva /7.5kva /10kva Overload Protection: Fuse or Overload Protection Switch;Frequency: 50hz/60hz;Insulation Class: Class B;Working Temperature: -5c~+40c;Temperature Rise Protection: Yes;Current: 9a
Features
To Convert 110 Volts to 220 Volts: Make Sure the Appliance to Be Plugged in Uses Fewer Watts than the Transformer’s Rating. Insert the Voltage Tap Plug (Located on the Rear of the Transformer) into the Pair of Holes Marked “110”.Plug the Transformer’s Power Cord into a Source of 110 Volts.220 Volts Will Be Available at the Front Panel Outlet Marked “220” Volts When the Power Switch Is Turned on.
To Convert 220 Volts to 110 Volts: Make Sure the Appliance to Be Plugged in Uses Fewer Watts than the Transformer’s Rating. Insert the Voltage Tap Plug (Located on the Rear of the Transformer) into the Pair of Holes Corresponding to the Local Voltage Standard. Check Carefully to Be Sure No Error Has Been Made.
The Power of Our Transformer Must Be 2.5 Times Larger than the Buyer’s Appliance to Be Used Normally.
Note： the Power of This Product Is Too Large. It Can Only Be Connected to the Cable. Use the Cable to Directly Connect to the Electricity. You Cannot Use the Plug. the Plug Cannot Carry Such a Large Power.